Speaking of the acid cleaning method of the mold temperature machine scale, first of all, we actually should pay attention to the need to close the water outlet on the cooling water channel. Next, for the acid cleaning of the mold temperature machine scale, we In fact, it will directly add 20% to 30% of a dilute hydrochloric acid or 15% to 20% of a dilute sulfuric acid solution from the water inlet.

    Next, for the acid cleaning of the mold temperature machine scale, we actually need to pay attention to that it should be immersed directly under normal temperature for about 40 to 360 minutes. At the same time, it can actually be tapped or Vibration, as far as this aspect is concerned, can actually accelerate the shedding of scale itself to a certain degree.

    For the acid cleaning method of the mold temperature machine scale, we actually should pay attention to that it should be directly connected to the high-pressure water to rinse until no scale particles flow out. It is precisely because of this that we actually have to pay attention to it. In terms of washing time, it is actually about 30min. When the pickling does not achieve the effect once, in this respect, it can actually be pickled again until it completely cleans the scale.

   In terms of cleaning the scale of the mold temperature machine, we actually need to pay attention to it. When the scale of the condenser is more serious, we actually need to pay attention to that we can directly use a special descaling agent to soak, connect In the following, we actually need to pay attention to the need to poke every hour until it produces no gas.

    In terms of the physical cleaning method on the scale of the mold temperature machine, it is actually very convenient and simple. In terms of this aspect, it will actually include air cleaning, high pressure water cleaning and manual stabbing. For the different cleaning on the scale of the mold temperature machine, the steps and the results are actually different.