During the operation of the natural gas mold temperature controller, its pump power is based on customer needs, and its control temperature accuracy is within ± 1 ℃, saving more than 30% of electricity. The internal pipeline stainless steel is integrally formed, the heat loss in the pipe is small, and the heating is uniform. The unique heating design of the pipeline explosion-proof device and temperature automatic control can quickly reach the temperature requirements of various products.

Production efficiency of natural gas mold temperature controller and guarantee product quality

Natural gas mold temperature rise and fall speed is fast, the temperature is uniform and stable, and the temperature of the automatic exhaust and oil return is displayed at startup. It is controlled by imported micro-electricity or PLC, and the temperature accuracy can be controlled within ±1 degree to realize automatic management. The set value and actual value are displayed separately.

When the natural gas mold temperature machine is used, it mainly combines gas heat conduction oil boiler, flue gas waste heat utilization device, high position tank, circulation pump, combustion system, PLC control system, oil and gas separator, etc. . After being delivered to the user's site, it can be used as long as it is connected to the gas, electricity, and thermal oil import and export. No special boiler room is required. Due to the one-key operation, no special furnace worker is required.

To a certain extent, the natural gas mold temperature machine is mainly used in the use of flue gas waste heat. When it is used, its equipment is comprehensively used in the gas heat conduction oil boiler 200 or even more than 300 degrees high-temperature flue gas through the waste heat utilization device, and the exhaust temperature is only About 75℃, and the air that enters the furnace through the burner to support combustion can reach more than 100℃. According to the measurement of users in many industries, the natural gas mold temperature machine can save more than 10% gas compared with the same specification of thermal oil boiler.

The equipment of natural gas mold temperature controller is highly integrated, the system is simple, the resistance is small, the temperature can be controlled within ± 3 ℃, generally installed near the heating equipment, PLC control does not need to be on duty. Compared with the steam boiler of the same specification, it saves more than 30% gas, the energy saving benefit is very obvious, and the surface of the product is smooth. The high-pressure water descaling process is used twice in the process to ensure the smooth surface of the steel.